Discuss game box design and sharing.
Moderators: Ichibrothers , Cambronne
Beren
020
Posts: 48 Joined: 20 Aug 2008, 15:01
Contact:
Post
by Beren » 07 Sep 2008, 06:56
Great, with this new graphic treatment, with the same size i can achieve a little more quality, not only in maps, in counters the difference is clear...
A game of differences , which is the new one and whisch is the older (at 300%...)?
Jerome
Site Admin
Posts: 974 Joined: 22 Jun 2006, 21:31
Location: France
Contact:
Post
by Jerome » 07 Sep 2008, 07:59
The image on the left has less compression artifacts.
Jerome, ZunTzu developer.
Beren
020
Posts: 48 Joined: 20 Aug 2008, 15:01
Contact:
Post
by Beren » 08 Sep 2008, 08:14
Jerome, is it possible to use .png in the gamebox instead of jpegs?
Jerome
Site Admin
Posts: 974 Joined: 22 Jun 2006, 21:31
Location: France
Contact:
Post
by Jerome » 08 Sep 2008, 11:37
Beren wrote: Jerome, is it possible to use .png in the gamebox instead of jpegs?
Yes. Non-interlaced PNG.
I've found out that JPEG files were usually smaller than PNG files, even when setting the JPEG quality to 10 in Photoshop - which I usually do.
Note that transparency masks should always be saved as PNG.
Jerome, ZunTzu developer.
Jerome
Site Admin
Posts: 974 Joined: 22 Jun 2006, 21:31
Location: France
Contact:
Post
by Jerome » 08 Sep 2008, 11:53
On second thoughts, the charts and force pool would benefit from being saved as PNG.
Make sure you use an optimization tool such as pngout .
Jerome, ZunTzu developer.
Beren
020
Posts: 48 Joined: 20 Aug 2008, 15:01
Contact:
Post
by Beren » 17 Sep 2008, 08:42
An image comparison between WiF Vassal module and mine for ZT
Bill Barrett
231
Posts: 351 Joined: 25 May 2008, 13:25
Post
by Bill Barrett » 18 Sep 2008, 00:13
An image comparison between WiF Vassal module and mine for ZT
Well... that'd be a win for ZunTzu I guess
Beren
020
Posts: 48 Joined: 20 Aug 2008, 15:01
Contact:
Post
by Beren » 18 Sep 2008, 14:43
I think i have it finished, but i can´t add scenarios, i did some for different starts depending on what expansions... but when i try to open scenario, all scenarios are named 1939, and not with the nema i gave them, what happens?
Bill Barrett
231
Posts: 351 Joined: 25 May 2008, 13:25
Post
by Bill Barrett » 18 Sep 2008, 18:14
all scenarios are named 1939, and not with the nema i gave them, what happens?
Hi Beren, not sure, but it looks like you haven't changed your scenario names in your scenario.zts files.
Beren
020
Posts: 48 Joined: 20 Aug 2008, 15:01
Contact:
Post
by Beren » 18 Sep 2008, 18:18
yes you are right, i resolved it 2 hours ago, and Jerome has the module, soon you will see it... but you will need 2 GB RAM at least i think...
Bill Barrett
231
Posts: 351 Joined: 25 May 2008, 13:25
Post
by Bill Barrett » 18 Sep 2008, 18:29
but you will need 2 GB RAM at least i think...
...ah at last I can give my wife a convincing reason to upgrade my PC
Beren
020
Posts: 48 Joined: 20 Aug 2008, 15:01
Contact:
Post
by Beren » 18 Sep 2008, 18:39
jajajaja, it´s worth value, I assure you
Beren
020
Posts: 48 Joined: 20 Aug 2008, 15:01
Contact:
Post
by Beren » 20 Sep 2008, 09:38
Added to Files