Just finished my first module (The Russian Campaign) and I'm having problems with stacked units. The stacks are not compressed and are taking up too much space.
http://www.flickr.com/photos/63087489@N08/5732691033/
Any ideas?
Thanks[/img]
Need help with Stacking
Moderators: Ichibrothers, Cambronne
- Bill Barrett
- 231
- Posts: 351
- Joined: 25 May 2008, 13:25
It seems that the resolution of your scan is too low. ZunTzu assumed that the images were 150 dots-per-inch when in reality they were probably closer to 80 dpi. That's why there seems to be large offsets between the counters. Actually the offsets are OK, it's the counters that are tiny.
Jerome, ZunTzu developer.
You are correct Jerome. I changed the DPI setting for counters and map to 150 and the stacks became somewhat tighter.Jerome wrote:It seems that the resolution of your scan is too low. ZunTzu assumed that the images were 150 dots-per-inch when in reality they were probably closer to 80 dpi. That's why there seems to be large offsets between the counters. Actually the offsets are OK, it's the counters that are tiny.
I used the scans that came with the game CD and I'm not sure what resolution they used. Would TZ support setting the resolution to less than 150?
Thanks